3
Quick Start
Power –
Install a fresh 9V battery (not included) or connect a Fishman
power adaptor.
Set the controls –
Volume
at minimum and all other controls as
shown below.
Plug in –
Use standard ¼-inch and XLR shielded instrument cables.
Tune up –
Step on the tuner footswitch to tune with the output muted.
Set trim –
Play hard and adjust the input
trim
(on the right side) so the
clip/batt
LED flashes only occasionally.
Select an Image –
Raise the
volume
and audition Images with the
select
knob. Move the
Image Bank
slider to choose the set of Images
that best match the instrument you’re playing. (see pages 6 thru 13)
Blend to taste –
Turn left for more pickup and right for more Image.
Kill feedback –
If feedback starts, change the position of the
phase
switch. For advanced feedback handling, check out the section detailing
the automatic feedback filters on page 24.
Summary of Contents for AURA SPECTRUM DI
Page 1: ...fishman com USER GUIDE AURA SPECTRUMDI...
Page 17: ...17...
