6
Rubber Bumpers
15 inch Marine Board baseplates are supplied with small
rubber standoffs as there will likely be some flex in the
baseplate assembly. The rubber standoffs are to protect the
boat gunwale.
Installation of the Transducers onto the Downrod
WHEN ASSEMBLING DOWNROD PARTS, ALWAYS REMOVE ALL SCREWS SO YOU
CAN EASILY LOCATE SCREW HOLES
The downrod comes in several styles. You may have a solid or telescoping version which is
between
36 to 60 inches long. There are also 2 diameters: 1” or 1.25” OD a
nd this is
dependent on the depth finder which was specified on your order. There are also a couple
options which may have been ordered: A second downrod cone or perhaps a handle
assembly.
Downrod types
360 Series downrod
Telescoping Downrod
Solid Downrod
Typical Downrod Ends:
Standard Puck
Humminbird Mega g1 Lowrance LSS,
TotalScan, SS
Garmin
Livescope