FishHunter MILITARY, User Manual

Page: 22 / 30

22
Auto Ranging:
In order to optimize your experience, we have created an auto
ranging function within the app. Every time you cast the
FishHunter™ MILITARY into the water the screen will take a few
seconds to "find the bottom" depth for the area you are fishing
in. This function allows us to automaticlaly balance the gain and
pulse width of your sonar to maximize the results at each depth
you are fishing in. In most cases, we recommend leaving it on
"auto ranging" for the best results.
If you are taking your FishHunter™ MILITARY in and out of the
water repeatedly, example when casting, we recommend
manually setting the depth range to increase the speed of your
FishHunter™ MILITARY. You can set the depth manually by
going into the side menu and selecting the depth you are going
to be fishing in.
Surface Filter Slider/Ice Thickness Slider:
Whenever you use a fish finder, you will get what is called
surface reverb or surface noise as the sound waves from the
transducer reach the surface of the water.
The Surface Filter allows you to customize how much of the area
on the surface you would like your FishHunter™ MILITARY to
ignore or include to give you the most accurate fish detection
possible.
The filter is set to the center position by default each time you
turn on the sonar, but as you adjust the slider from left to right
you will see that a number appears on the right hand side of the
slider. This number is the ACTUAL amount of the surface that
will NOT be measured by your FishHunter™ MILITARY.
2
3