- 23 -
Charging method for battery
(1) Direct charge to the battery
(2) While the battery is installed the light
1. Uninstall the battery from the light.
2. Insert the AC plug of the charger to the power outlet.
3. Make sure the LED of the charger turns green.
4. Put the connector of the charger into the battery.
5. Make sure the LED turns to red.
6. The LED turns to green again when charging is complete.
(Charging time is 3 hours maximum)
7. Pull out the connector from the battery.
1. Put the guide plug of the charging plug II into the EF sensor
connecter. [1]
2. Slide the charging plug II counterclockwise until clicked. [2]
3. Insert the AC plug of the charger to the power outlet.
4. Make sure the LED of the charger turns green.
5. Put the connector of the charger into the charging plug II. [3]
6. Make sure the LED turns to red.
7. The LED turns to green again when charging is complete.
(Charging time is 3 hours maximum)
8. Pull out the connector from the charging plug II, then remove the
plug.
The LED remains green when the battery is fully charged.
NOTE
Charging plug II
[1]
[2]
[3]