Fisheye FIX AQUAVOLT 7000 a, Product Manual

Page: 22 / 32

- 22 -
-Do not work with wet hands or under wet conditions due to the risk of
electric shock or damage.
-Make sure that there is no dust, sand etc. on the O-ring, O-ring groove or O-ring
contact surface and grease the O-ring before closing the rear body.
-Take care not to drop when removing the battery. It may cause not only damage to the
battery but also injury.
-Attach the both protection caps to prevent any
short-circuit while keeping the battery.
1. Hold the front body firmly and remove the rear body by rotating anti-clockwise.
2. Take off both protection caps of the battery and confirm the direction of it.
3. The number of the front side electrode terminals is made smaller than that of the rear side
electrode terminals.
4. Tilt the front body and load the battery.
5. Hold the body case firmly and attach the Light Head by rotating clockwise.
*Battery removal is the opposite procedure.
Battery Loading Procedure
WARNING
CAUTION
If direction is reverse, the battery cannot install.
NOTE