- 18 -
Installation of YS Adapter
Installation example of 2-Way handgrip
1. Detach the YS adapter by a screw driver.
2. Attach the Ball adapter with an adapter holder. Tighten a screw clockwise and fix.
Battery Loading Procedure
1. Hold the front body firmly and remove the rear body by rotating anti-clockwise.
2. Load the battery to the rear body as per the below illustration.
3. Hold the body case firmly and attach the Light Head by rotating clockwise.
*Battery removal is the opposite procedure.
Horizontal
Vertical
How to Use
WARNING
Remote Control Connector
A screw hole for adapter fixation
Do not work with wet hands or under wet conditions due to the risk of
electric shock or damage.
-Make sure that there is no dust, sand etc. on the O-ring, O-ring groove or O-ring contact
surface and grease the O-ring before closing the rear body.
-Take care not to drop when removing the battery. It may cause not only damage to the
battery but also injury.
If direction is reverse, the battery
cannot install.
