August 10, 2005
4
Lit. No. 13648/9511, Rev. 07
950 lb.
371 lb.
3.9 ft.³
Sand = 95 lb./ft³
Salt = 40 lb./ft³
10 ft.³ 400 lb.
3.9 ft.³
156 lb.
385 lb. Spreader
385 lb. Spreader
785 lb. Total Weight
541 lb. Total Weight
10 ft.³
385 lb. Spreader
1335 lb. Total Weight
385 lb. Spreader
756 lb. Total Weight
* Spreader weight includes Under Frame Mount.
Subtract 100 lb. if using an In-Bed Mount.
Weight*
Weight*
Weight*
Weight*
Salt = 40 lb./ft³
Very Coarse = 35 lb./ft.³
Coarse = 45 lb./ft.³
Fine = 50 lb./ft.³
LOADING
This manual covers vehicles which have been
recommended for carrying the spreader. Please see
your local dealer for proper vehicle applications.
Certification
Approximate Salt Weight
WARNING
Overloading could result in an accident or
damage. Do not exceed GVWR or GAWR
ratings as found in the driver-side vehicle door
cornerpost.
Approximate Sand Weight
Load Weights
NOTE: If spreader and ice control material loading
is in doubt, weigh vehicle for compliance with
vehicle ratings.
NOTE: Use only dry, free-flowing granular
materials with this spreader. Damp or wet ice
control materials and other products may not
spread properly.
WARNING
New untitled vehicle installation of a spreader
requires National Highway Traffic Safety
Administration altered vehicle certification
labeling. Installer to verify that struck load of
snow or ice control material does not exceed
GVWR or GAWR rating label and complies with
FMVSS.
WARNING
The use of under-frame or in-bed mounts on
half-ton trucks is restricted to spreading only
salt or calcium chloride. (max. 50 lb. per cu. ft.)
Failure to comply could result in exceeding the
payload capacity.
CAUTION
Read and adhere to manufacturer’s ice control
package labeling including Material Safety
Data Sheet requirements.
