Lit. No. 48593, Rev. 00
7
August 15, 2009
3. Twist both connecting pins to release spring
tension, then push plow gear toward vehicle so
connecting pins fully engage holes in attachment
arms.
4. Loosen one jack handle and slide jack sleeve
down below jack retainer. Remove jack and
retighten handle. Repeat for other jack and store
them.
5. Connect all electrical cables from vehicle to
snowplow.
MOUNTING SNOWPLOW TO VEHICLE
ATTACHING SNOWPLOW
NOTE: The blade must be in the straight position
when attaching or detaching the snowplow.
NOTE: Use dielectric grease to prevent corrosion
on all connections.
NOTE: Use lubricant on connecting pins to ensure
ease of attach/detach.
1. Make certain both connecting pins are fully
retracted.
2. Drive vehicle slowly to completely insert
attachment arms into receiver assembly slots.
WARNING
Inspect snowplow components and fasteners
for wear or damage whenever attaching or
detaching the snowplow. Worn or damaged
components could allow the snowplow to
drop unexpectedly.
Jack
Retainer
Jack
Sleeve
Jack
Jack
Handle
Connecting
Pin
Plow Gear
ON
OFF
Receiver
Assembly
Attachment
Arm
WARNING
Keep 8' clear of the blade drop zone when it is
being raised, lowered or angled. Do not stand
between the vehicle and blade or directly
in front of the blade. If the blade hits you or
drops on you, you could be seriously injured.
