Your new Gold Strike provides you with 3 memory locations to store
your favorite control settings. These memory locations will store
the DISC level, THRESHOLD level, SENSITIVITY level, and GROUND
setting. Please note that the VOLUME level will not be stored and
will remain at your current setting at all times.
At this point, we would also like to remind you that your Gold Strike
has a last-setting memory feature. This means that the unit will
maintain the control settings when it is turned OFF, saving the same
settings for you when you turn your Gold Strike back ON.
By pressing the MENU button to enter the MENU mode and then
pressing it again until the “MEM” icon begins flashing, you will be
ready to store or recall your settings. Memory address “0” always
contains your current control settings, and is not a location to store
settings for later recall.
STORING SETTINGS:
1. Set the controls (DISC, THRESH, SENS, and GROUND) by using
the MENU button to select the control, and the UP and
DOWN arrow buttons to set to the desired levels.
2. Once the controls are set, press the MENU button until the
“MEM” icon blinks.
3. Use the UP or DOWN arrow buttons to select the MEM 1,
MEM 2, or MEM 3 storage location.
4. Then, press and hold the P/P MEM button for about 3
seconds. When the settings are stored, an audio tone will
sound and the “MEM” icon will blink twice. Release the P/P
MEM button and you are in the search mode and ready to
prospect. In addition, the settings are stored in the MEM
location you chose (1, 2, or 3).
RECALLING SETTINGS:
1. To recall a stored setting, press the MENU button to enter
the MENU mode, and then press it repeatedly until the MEM
icon is selected.
2. Using the UP or DOWN arrow buttons, select the MEM
location you want to recall.
Then, press the P/P MEM button for only 1 second and release it.
A brief audio tone will sound and the detector will enter the search
mode in the settings you recalled.
SETTING MEMORY CONTROL
18
