Fisher easy-Drive 200L, Instruction Manual, Page: 1 / 32

www.Fisher.com
Fisher
™
easy-Drive
™
200L
Contents
Introduction 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Scope of Manual 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Description 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Educational Services 3 . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Special Instructions for “Safe Use” and Installations
in Hazardous Locations 4 . . . . . . . . . . . . . . . . . . . . .
Actuator Mounting 4 . . . . . . . . . . . . . . . . . . . . . . . . . .
Startup Overview 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuration 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Method Configuration 11 . . . . . . . . . . . .
Modbus Setup 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting using the Fisher easy-Drive
configuration software 12 . . . . . . . . . . . . . . . .
Initial Setup 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calibration Instructions 13 . . . . . . . . . . . . . . . . . .
Operational Verification 15 . . . . . . . . . . . . . . . . . .
Troubleshooting 17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance 18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disassembly 18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Ordering 21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Kits 21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts List 21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix A - Modbus 23 . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix B - Certificate of Conformance 29 . . . . . . . . .
Figure 1. Fisher easy-Drive 200L
X1520-1
Introduction
Scope of Manual
This instruction manual provides installation, maintenance, and parts information for the easy-Drive 200L. Do not
install, operate, or maintain an easy-Drive 200L without being fully trained and qualified in valve, actuator, and
accessory installation, operation, and maintenance.
To avoid personal injury or property damage, it is important to
carefully read, understand, and follow all the contents of this manual, including all safety cautions and warnings. If you
have any questions about these instructions, contact your Emerson sales office before proceeding.
Description
The easy-Drive 200L is a compact, rugged electric actuator designed primarily for high‐pressure throttling
applications. This actuator is ideal for use on pressure and flow control applications.
Specifications
Table 1 lists specifications for the easy-Drive 200L. Some of the specifications for a given actuator as it originally comes
from the factory are stamped on a nameplate located on the lower actuator enclosure.
Instruction Manual
D104331X012
easy-Drive 200L
December 2018