Fisher COIN STRIKE, Operating Manual

Page: 10 / 28

8
d. The SALT mode can be activated or turned off with
the Auto Ground button. While in the MENU, when
the two-digit display shows “SO”, the SALT mode is
off. Use this setting for all hunting conditions except
wet sand (beaches) with salt content and NO black
sand (magnetic soil). Press and release the Auto
Ground button to toggle the SALT mode on (display
will show “S1”). Press and release again to toggle it
off. For more beach hunting tips, see the WET SAND
HUNTING section.
e. The VOLUME can be adjusted and listened to when
the VOLUME icon is flashing by using the UP and
DOWN arrow buttons.
f. The NOTCH Discrimination (“no” on the two digit
display in the MENU) can be adjusted as follows:
1. The UP/DOWN arrow buttons will allow you to
choose which NOTCH category to alter.
2. Once you have chosen which category to
change (FOIL, NICKEL, TABS, or ZINC), pushing and
releasing the ALL METAL/DISC button turns the
NOTCH filter ON or OFF.
- If the square next to the chosen category
blinks quickly (on more than off) that target
will be accepted.
- If the square next to the chosen category
blinks slowly (off more than on) that target will
be rejected.
- When in the SEARCH mode, if the square is
ON, the target is accepted; if the square is
OFF, the target is rejected.
Remember, to exit the MENU mode at any time, simply press the
P/P (MEM) button to return to the SEARCH mode
4. The AUTO GROUND button enables you to achieve a precision
ground balance with one touch. Auto Ground Balance is explained
in more detail on page 15. This button also toggles the SALT mode
on or off while in MENU.
CONTROL PANEL