Fisher Scientific Isotemp 150 Safety Information Manual Download Page 9

9

Cabinet Cleaning 

The cabinet interior should be cleaned frequently. Any
spilled liquid should be wiped off immediately since stains
resulting from some spills could be permanent if not
quickly removed. The most convenient time to clean the
interior is after defrosting.

The exterior of the cabinet should be cleaned occasional-
ly. A mild detergent and lukewarm water or solution of
bicarbonate of soda (1 tablespoon per gallon of water) is
recommended for cleaning the interior and exterior of the
cabinet. All surfaces should be rinsed and thoroughly
dried.

Condenser

The condenser coil is located behind the sides and top 
exterior panel. These surfaces may be warm to the touch.
This is necessary to the operation of the refrigeration 
equipment and is normal.

Maintenance

Caution

Do not use any type of abrasive such
as steel wool or fluids such as gaso-
line, Naphtha and thinner. These mate-
rials could be harmful to aluminum,
plastic materials, door gasket and/or
painted surface.

Caution

When servicing the unit, disconnect
from the electrical power source.

Summary of Contents for Isotemp 150













Reviews: