Fisher Scientific Fisher Sei 100L Gravty, Operation Manual

Page: 35 / 63

Fisherbrand 50145736 | 27
Operation
Preparing the Oven
The oven must not be released for operation before all major start-up activities have been
completed (see “Start-up” on page 19).
Device Check
Prior to starting operation, the following oven components must be checked for their correct function:

The door seal in the front frame must not be damaged.

The shelving components must be installed safely.
Disinfecting the Oven’s Work Space
Disinfect the work space according to the operator-specified hygiene guidelines.
Starting Operation
1. Turn the oven on using the control panel.
2. Adjust the temperature set value on the control panel.
3. The temperature controller starts adjusting the work space to the user-specified temperature
set value now.
NOTE
Upon initial installation and subsequent heat-up, this appliance may produce an odor and
trace evolution of non-toxic vapor that results from brake-out of the insulation binder.
This condition is normal for factory-new products and will diminish with continued operation.
To avoid any risk of explosion or fire
• refrain from loading the oven with any of the substances listed in the section
“Incorrect Use” on page 5
• make sure that the ambient air is free of any solvents
• do not operate the oven in areas with an explosion hazard