Rev. 6-12
12
FRONT PANEL
Touch screen display
Displays prompts and control parameters including:
• Amplitude selected
• Output power delivered to the probe in watts
• Selected duration of processing
• Actual processing time
• Elapsed time
• Set and read temperature
• Pulse on/off duration
• Accumulated amount of energy in Joules delivered to the probe
0 – 9 key
Input digits for programming screens
EXIT
key
Moves to previous screen
ENT
key
Completes parameter entry on programming screens
CLR
key
Deletes selected parameter entry
RUN
key
To proceed to program run screen
SAVE
key
Stores a program to the selected memory number. Up to 10
programs (0-9) can be stored.
START/STOP
key
Starts or stops the ultrasonics.
PAUSE
key
Suspends operation, without clearing program/run totals. Press
pause again to resume program/run and continue accumulating run
data.
▲ ▼
key
Used to set the amplitude of vibration at the probe tip. Also used to
increase or decrease the amplitude in small increments while the unit
is runnng.
For explanations of each screen and button on the ultrasonic processor and complete
programming instructions please see Section 7 of this manual.
