3-2
Isotemp Premium Ovens
Fisher Scientific
Section 3
Installation
Preparing the Oven
1. Install the shelf.
2. Make certain all packing material has been removed from oven
chamber.
3. Connect the line cord to an appropriate electrical outlet.
4. The oven is now ready for operation. No preliminary adjustments are
required. Depending on customer application and laboratory
procedures, a initial calibration may be done at this point. See
Display
Offsets
.
Caution
See data plate on oven for voltage, current and line frequency
specifications. Check that the power requirements of the oven will not
overload the circuit.
s
The 700 Series ovens feature a front panel mounted power switch which is
a combination power switch and circuit breaker, eliminating the need for
separate fusing. The circuit breaker will interrupt power in the event of an
oven heater malfunction.
Press the I (upper) half of the rocker-type power switch to turn the oven
On. Press the 0 (lower) half to turn Off oven power. To reset the breaker,
first place the switch in the Off position, then return it to the On position.
Power Switch
