background image

31

Comprehensive Operating Manual & Guide to Metal Detecting 

PRO-TECH 

TARGET PINPOINTING

After you have identified a target using Discrimination Mode,
press-and-hold the PINPOINT button to identify the target's exact location. This
technique can yield more information about the target's shape and size and also find
its exact location to facilitate extraction.

Pinpoint as follows:

1. Position the searchcoil just barely off the ground, and to the side of the target.
2. Now move the searchcoil slowly across the target; you can locate it by the

sound.  The target is located directly under where the sound is loudest.

Narrow It Down:

1. To narrow the response further, position the center of the searchcoil near the

center of the response pattern, but not directly over the center.

2. Release the PINPOINT button.
3. Press-and-hold PINPOINT button again.
4. Repeat this narrowing procedure to narrow the field of detection further.

Note: Depth indication is less accurate

after narrowing.

SEARCHCOIL DRIFT

If you plan to use the
PINPOINT Mode for
continuous searching, realize
that drift will occur over time,
causing the detector to gain or
lose sensitivity. Periodic
retuning of the detector is
required to minimize drift;
release and press PINPOINT
again to retune.

6

ASSEMBLY

Adjusting the Armrest

The armrest may be moved forward or
backward by removing the single screw
and nut, and then repositioning the 2-piece
armrest.  Users with shorter arms may find
the armrest more comfortable in the
forward position.  In order to move the
armrest backward, the plastic plug must be
removed from the aluminum tube.

Armrest Strap

The PRO-TECH comes with an armrest
strap for users who prefer to swing the
detector vigorously, in order to hold the
detector securely against the arm.

The detector can always be used without
the strap, with no compromise to detector
balance and stability under most
conditions.

Searchcoil

Battery
Compartment
(back side)

Hand-grip

Nut

Screw

1/4”

Headphone

Jack

Searchcoil

Cable

Locking
Collar

Locking
Collar

Upper
Stem

Cable
Plug

S-Rod

Armrest

Velcro

Strap

Velcro

Strap

Arm Strap

PRO-TECH

Comprehensive Operating Manual & Guide to Metal Detecting

Summary of Contents for PRO-TECH





































Reviews: