Battery Replacement
For best performance, we recommend
replacing the battery that came with
this toy with one new “AA” (LR6)
alkaline battery.
• Locate the battery compartment door
on the back of the fishy toy. Loosen
the screws in the door with a Phillips
screwdriver and remove the door.
• Remove the exhausted battery and
dispose of it properly.
• Insert a new “AA” (LR6)
alkaline
battery.
• Replace the battery compartment
door and tighten the screws. Do not
over-tighten.
• If the fishy toy begins to operate
erratically, you may need to reset the
electronics. Remove the battery and
reinstall it.
• When sounds become faint or stop,
it’s time for an adult to change
the battery.
1,5V
“AA” (LR6)
Battery Safety Information
In exceptional circumstances, batteries
may leak fl uids that can cause a chemical
burn injury or ruin your toy. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the toy. Dispose of
batteries safely. Do not dispose of this
product in a fi re. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from
the toy before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.
