4
Battery Replacement
For best performance, we recommend
replacing the batteries that came with
this toy with three, new “AA” (LR6)
alkaline batteries.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver and remove it. Remove
the exhausted batteries and dispose of
them properly.
• Insert three, new “AA” (LR6)
alkaline
batteries.
• Replace the battery compartment
door and tighten the screw. Do not
over-tighten.
• If this toy begins to operate erratically,
you may need to reset the electronics.
Slide the power/volume switch off and
back on.
• When sounds or lights from this toy
become faint or stop, it's time for
an adult to change the batteries.
In exceptional circumstances, batteries
may leak fluids that can cause
a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery
terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
1,5V x 3
"AA" (LR6)
Battery Safety
Information
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.