background image

6

To prevent serious injury or death:

•  

Fall Hazard - Never use on any 

elevated surface, since child's 

movement may cause the product to 

slide or tip over. Use only on a floor.

•  

Suffocation Hazard - Never use on  

a soft surface (bed, sofa, cushion) 

since the product can tip over and 

cause suffocation in soft surfaces.

•  Always use restraint system.

•  Never leave child unattended.

•  Do not use product once child can  

sit unaided.

•  This product is not intended to replace 

a cot or bed for prolonged periods  

of sleep.

•  Never use toy bar to carry product.

•  Never use as a carrier or lift while 

child is seated.

   WARNING

• Press the button on the frame hub.

1

• Pull the front legs apart until you hear a "

click

".

2

PRESS

Hub

Front Legs

Setup and Use

Restraint Belts

Securing Your Infant

• Place your child in the seat. Position the crotch pad between your 

child’s legs.

• Fasten the restraint belts to the crotch pad. 

Make sure you hear  

a “click” on both sides

.

• Check to be sure the restraint system is securely attached by  

pulling it away from your child. The restraint system should 

remain attached.

• Tighten each waist belt so that the restraint system is snug against 

your child. Please refer to the next section for instructions to 

tighten the waist belts.

Crotch Pad

3

To tighten the restraint belts:

• Feed the anchored end of the restraint belt up through the buckle 

to form a loop 

A

. Pull the free end of the restraint belt 

B

.

To loosen the restraint belts:

• Feed the free end of the restraint belt up through the buckle to 

form a loop 

A

. Enlarge the loop by pulling on the end of the loop 

toward the buckle. Pull the anchored end of the restraint belt to 

shorten the free end of the restraint belt 

B

.

TIGHTEN

LOOSEN

4

Free End

Anchored End

Anchored End

Free End

Summary of Contents for W9453









Reviews: