5
Battery
Replacement
For best performance, we recommend
replacing the battery that came with
this toy with a new “AA” (LR6)
alkaline battery.
• Locate the battery compartment door
on the back of the this toy. Loosen
the screws in the door and remove it.
• Remove the exhausted battery and
dispose of it properly.
• Insert a new “AA” (LR6)
alkaline
battery.
• Replace the battery compartment
door and tighten the screws.
Do not over-tighten.
• If this toy begins to operate erratically,
you may need to reset the electronics.
Slide the power/volume switch off
and then back on.
• When sounds from this toy become
faint or stop, it’s time for an adult to
change the battery.
1,5V
“AA” (LR6)
Battery Safety
Information
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin yourproduct. To
avoid battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose
of batteries safely. Do not dispose of
this product in a fire. The batteries
inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
