6
Yellow Support
Gas Pump
Tower Top
Assembly
Turn the assembly around so that the gas pump is facing you.
•
Fit the yellow support into the sockets in the base. Push to
•
“snap”
in place.
Fit the tower top onto the supports. Push near each of the four corners to
•
“snap”
in place.
Hint:
The tower top is designed to fit on the supports one way. If it does not seem to fit, turn it
around and try again!
4
5
Fit the supports on the assembly into the sockets in the ramp, as shown. Push to
•
“snap”
in place.
6
Ramp
