• Locate the battery compartment
door on the bottom on the toy.
Loosen the screws in the battery
compartment door and remove
the door.
• Insert three “AA” (LR6)
alkaline
batteries.
Hint:
We recommend
alkaline
batteries for longer battery life.
• Replace the battery compartment
door and tighten the screws. Do
not over-tighten.
• If this toy begins to operate
erratically, you may need to reset
the electronics. Remove the
batteries and reinstall them.
• When lights or motion from this
toy become faint or stop, it’s time
for an adult to change the batteries.
Battery Installation
Note:
To avoid moisture in the
battery compartment, replace the
battery compartment door after
installing batteries. Tighten the
screws in the battery compartment
door with a Phillips screwdriver.
Make sure the battery compartment
door is fully assembled, according
to these instructions.
1,5V x 3
“AA” (LR6)
• Protect the environment
by not disposing of this
product with household
waste (2002/96/EC).
Check your local
authority for recycling
advice and facilities.
Battery Safety Information
In exceptional circumstances,
batteries may leak fluids that can
cause a chemical burn injury or
ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always
remove exhausted batteries from
the product. Dispose of batteries
safely. Do not dispose of this
product in a fire. The batteries
inside may explode or leak.
• Never short-circuit the
battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries
from the product before charging.
• If removable, rechargeable batteries
are used, they are only to be
charged under adult supervision.
