11
Label Decorations
Front View
Battery Installation
1.5V x 3
“AA” (LR6)
Shown Actual Size
Battery Compartment Door
• Locate the battery compartment on the back of the
window assembly.
• Loosen the screws in the battery compartment door with a
Phillips screwdriver. Remove the battery compartment door.
• Insert three “AA” (LR6)
alkaline
batteries, as indicated inside
the battery compartment.
Hint:
We recommend using
alkaline
batteries for
longer life.
• Replace the battery compartment door and tighten
the screws.
• When sounds from this toy become faint or stop, it’s time
for an adult to change the batteries!
Battery Safety Information
Batteries may leak fluids that can cause a chemical burn injury
or ruin your toy. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different
types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always
remove exhausted batteries from the toy. Dispose of batteries
safely. Do not dispose of batteries in a fire. The batteries may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging.
• If removable, rechargeable batteries are used, they are only
to be charged under adult supervision.
• Apply the labels as
shown in the illustration.
• For best results, wash
your hands before
applying the labels and
make sure the areas to
which the labels will be
applied are clean and
dry. Avoid repositioning
a label once it has
been applied.
