7
Secure Your Child
• Turn the toy bar out of the way or remove it altogether.
• Place your child in the seat. Position the restraint pad between
your child’s legs.
• Fasten the waist belts to each side of the restraint pad. Make sure
you hear a
“click”
on both sides.
• Check to be sure the restraint system is securely attached by
pulling it away from your child. The restraint system should
remain attached.
Waist Belt
Waist Belt
Restraint Pad
1
• Tighten each waist belt so that the restraint system is snug against
your child. Please refer to the next section for instructions to
tighten the waist belts.
Anchored End
Free End
To tighten:
• Feed the anchored end of the waist belt up through the buckle to
form a loop
A
. Pull the free end of the waist belt
B
.
To loosen:
• Feed the free end of the waist belt up through the buckle to form
a loop
A
. Enlarge the loop by pulling on the end of the loop
toward the buckle. Pull the anchored end of the waist belt to
shorten the free end of the waist belt
B
.
Anchored End
Free End
TIGHTEN
LOOSEN
2
Soothing Vibrations
• Make sure your child is properly secured in the seat.
• Slide the power switch on the soothing unit to for vibrations
and
O
to turn vibrations off.
Note:
If vibrations from the soothing unit become faint, or if there
are no vibrations, remove the battery from the soothing unit and
dispose of it properly. Replace the battery with a new “D” (LR20)
alkaline
battery.
