3
Parts
IMPORTANT!
Please remove all parts from the package and identify
them before assembly. Some parts may be packed in the pad.
Pad
Retainer
Body Support
Left Base Wire
Base Tube
2 Feet
Right Base Wire
Seat Back Tube
Footrest
Retainer
Toy Bar
Note:
Screw shown actual size. Tighten or loosen all screws
with a Phillips screwdriver. Do not over-tighten the screws.
M5 x 20 mm Screw – 4
1
2
• Place the base tube on a flat surface.
• Position the left and right base wires as shown.
• Fit the left base wire and right base wire into the base tube.
IMPORTANT!
Before assembly and each use, inspect this product
for damaged hardware, loose joints, missing parts or sharp edges.
DO NOT use if any parts are missing or broken. Contact Fisher-Price
®
for replacement parts and instructions if needed. Never substitute parts.
Right Base Wire
Base Tube
Left Base Wire
Non-Skid Surface
• Position the feet with the
non-skid surface is down
.
• Fit the feet on the base tube, as shown.
Assembly
