Battery Installation
• Loosen the screw in the battery
compartment door with
a Phillips screwdriver.
• Lift the battery compartment door to open.
• Insert four, new size “C” (LR14) alkaline batteries,
as indicated inside the battery compartment.
• Replace the battery compartment door and tighten the
screw with a Phillips screwdriver. Do not over-tighten.
Battery
Compartment
Door
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always remove exhausted
batteries from this toy. Battery leakage and corrosion can damage the toy.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended
in the “Battery Installation” instructions are to be used.
• If removable rechargeable batteries are used, they are only to be charged
under adult supervision.
• Rechargeable batteries are to be removed from this toy before they are charged.
• If you use a battery charger, it should be examined regularly for damage to the cord,
plug, enclosure and other parts. Do not use a damaged battery charger until it has
been properly repaired.
1.5V x 4
“C” (LR14)
Shown Actual Size
