Attaching the Deck
• Position the Townhouse face up on a flat surface, so
that the bottom faces you.
• Fit the deck tabs into the grooves in the bottom of the
Townhouse, as shown.
• Insert two screws through the holes in the bottom of
the deck and into the bottom of the Townhouse.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Deck
Grooves
Tabs
Townhouse
Battery Installation
Battery Safety Information
Battery
Compartment
Door
1.5V x 3
“D” (LR20)
SHOWN ACTUAL SIZE
• Locate the battery compartment on the back of
the Townhouse.
• Loosen the screws in the battery compartment door
with a Phillips screwdriver.
• Lift to remove the battery compartment door.
• Insert three “D” (LR20)
alkaline
batteries.
Helpful Hint
: We recommend using
alkaline
batteries for
longer battery life.
• Replace the battery compartment door and tighten the
screws with a Phillips screwdriver. Do not over-tighten.
• When sounds or lights from this toy stop working, stay
on constantly, or work erratically, it’s time for an adult
to replace the batteries!
3
Batteries may leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of
different types: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery com-
partment.
• Remove batteries during long periods of non-use.
Always remove exhausted batteries from the product.
Dispose of batteries safely. Do not dispose of batteries
in a fire. The batteries may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product
before charging.
• If removable, rechargeable batteries are used, they are
only to be charged under adult supervision.
Bottom View
