5
• Fit the other leg to the shelves. Make sure the tabs on
the shelves fit into the grooves in the leg.
• Insert four #8 x
3
/
4
" screws into the outside of the leg.
Tighten the screws.
Hint:
If you forgot to fit the tabs on the shelves into the
grooves on the legs, it is still possible to do this without
removing the legs. Simply press to
“snap”
the tabs into
the grooves.
Leg
Shelves
Assembly
6
• Look inside the assembly and note the star on one of
the legs.
• Look underneath the counter top for the star on one end.
• Positon the counter top so the star is over the star on the
leg. Fit the counter top to the assembly.
• Insert two #8 x
3
/
4
" screws into the counter top and tighten.
Counter Top
7
• Turn the assembly upside down. Insert four #8 x
1
/
2
"
screws into the tabs on the legs. Tighten the screws.
Hint:
You will need to hold the screwdriver at an angle.
8
•
"Snap"
the cash register base into the counter top.
Cash
Register
Base
#8 x
3
/
4
" Screw - 2
#8 x
1
/
2
" Screw - 4
#8 x
3
/
4
" Screw - 2
5
Groove
Tab
Star
(Underside)
Star
(Inside)
