Assembly
Cap Nut
• Place a cap nut on a scrap block of wood.
• Place the handle pin into the cap nut and tap with a
hammer until secure.
• Fit the handle onto the front post, aligning the holes in the
front post with the holes in the handle.
• Insert the handle pin through the holes in the handle and
front post.
5
Helpful Hint:
You may need the help of another person
with this step.
• Position the scrap block of wood on top of the cap nut
already attached to the handle pin.
• Place a cap nut onto the end of the handle pin.
• While holding the handle pin in place with the scrap block
of wood, tap the cap nut with a hammer until it is secure.
Assembly is now complete.
Handle
Handle
Pin
Front Post
