Building the Hyper Jet
™
• Position the cargo door near the back of the jet with
the ramp facing up.
• At an angle, fit the right side door peg into the right
hole in the jet body .
• Bend the door slightly and fit the left side door peg
into the left hole in the jet body .
• Rotate the cargo door up to close it.
• Fit the pegs on the sides
of the Mission Central
Console into the two
grooves on the top of
the jet body, as shown.
• Rotate the Mission Central Console down to store it
in the jet cargo bay.
5
7
•
“Snap”
the two glider supports into the jet body,
as shown.
6
4
Cargo Door
Mission Central
Console
Glider Support
Peg
Groove
A
B
A
B
