Battery
Replacement
For best performance, we recommend replacing
the batteries that came with this toy with two,
new alkaline "AA" (LR6) batteries.
• Locate the battery compartment door on the
back of the toy.
• Loosen the screws in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door.
• Remove the exhausted batteries and throw
them away.
• Insert two, new
alkaline
"AA" (LR6) batteries.
Hint:
We recommend using
alkaline
batteries for
longer battery life.
• Replace the battery compartment door and
tighten the screws with a Phillips screwdriver.
Do not over-tighten.
• If the toy begins to operate erratically you
may need to reset the electronics. Slide the
power/volume switch off and then back on.
• When sounds from this toy become faint
or stop, it’s time for an adult to change
the batteries!
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your toy. To avoid
battery leakage:
• Do not mix old and new batteries
or batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the battery
compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the toy. Dispose of batteries safely.
Do not dispose of the product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy
before charging.
• If removable, rechargeable batteries are used,
they are only to be charged under
adult supervision.
1.5V x 2
"AA" (LR6)
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities
(Europe only).
Battery Safety
Information
