7
Battery Installation
• Locate the battery compartment on the back of the toy.
• Loosen the screws in the battery compartment door with a Phillips
screwdriver. Remove the battery compartment door.
• Insert three, new “AA” (LR6)
alkaline
batteries.
Hint:
We recommend
alkaline
batteries for longer battery life.
• Replace the battery compartment door and tighten the screws.
• If this product begins to operate erratically, you may need to
reset the electronics. Slide the power/volume switch off and
then back on.
• When sounds/lights from this toy become faint or stop, it’s time
for an adult to change the batteries.
• Protect the environment by not disposing of this product
with household waste (2002/96/EC). Check your local
authority for recycling advice and facilities (Europe only).
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can
cause a chemical burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries of different types:
alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove
exhausted batteries from the product. Dispose of batteries safely.
Do not dispose of product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be
charged under adult supervision.
1,5V x 3
“AA” (LR6)
Battery Installation
12
13
• Fit the handle pieces onto the top of the assembly.
Hint:
The handle pieces are designed to only fit one way. If they do
not seem to fit, turn them around and try again!
• Insert three screws into the handle assembly and tighten.
Screws
Handle Pieces
Assembly
