background image

6

•  Pull the frame leg out on each frame to open. Make sure it 

"clicks"

 into place.

•  Position a frame so that the decorated side is outward.
•  Fit the end of a base into the back leg of a frame.
• Fit a screw retainer over the hole in the back leg, as shown.
•  Insert a #10 x 2,2 cm 

black

 screw through the screw retainer and 

back leg. Tighten the screw.

•  Repeat this procedure to fasten the other frame back leg to the 

other side of the base.

Hint: 

The #10 x 2,2 cm 

black

 screws may have been assembled to 

the screw retainers.

Frame Leg

Frame Decorated Side

Frame Back Legs

Screw Retainers

Base

7

Seat Assembly

• Fit the seat assembly between the frames.
•  Insert the seat bottom tubes into the sockets in each seat 

height adjuster.

Hints:

•  Be sure the seat height adjusters are in the same position 

(position 4).

•  You may need to push the frames apart slightly to fit the seat 

bottom tubes into the seat height adjuster sockets.

Sockets

Sockets

Seat Bottom Tubes

Seat Bottom Tubes

Seat Height Adjusters

Position 4

Press Lever

•  While pressing the levers on the seat height adjusters, lift them to 

position 4 on the frame front legs, as shown.

8

9

Assembly

Summary of Contents for P5755

















Reviews: