9
Battery Installation
• Locate the battery compartment on the back of the ramp and
bottom of ferris wheel.
• Loosen the screw in each battery compartment door with a
Phillips screwdriver. Remove each battery compartment door.
• Remove the exhausted batteries from the ferris wheel and
throw them away.
• Insert three "AA" (LR6)
alkaline
batteries in each toy.
Hint:
We recommend using
alkaline
batteries for
longer battery life.
• Replace each battery compartment door and tighten each
screw with a Phillips screwdriver. Do not over-tighten.
• If the toys begin to operate erratically, you may need to reset
the electronics. Slide the power switch on each toy off and
then back on.
• When sounds from this toy become faint or stop, it’s time for
an adult to change the batteries.
Ferris Wheel
Ramp
"AA" (LR6)
1.5V x 6
