3
Assembly
• Fit the ribbed ends of the base track into the grooves in the large and small curved tracks. Push down over both ribbed ends of
the base track to “snap” it into place.
Small Curved Track
Large Curved Track
Grooves
Base Track
Ribbed End
3
• Fit the pegs on the bridge into the large grooves in the top surface of the base track.
• Fit the pegs on the gate into the small grooves in the top surface of the base track.
• Lift the assembled track up slightly and fit the curved pond track grooves to the ribbed ends of the assembled track. Push down
over both ribbed ends of the assembled track to “snap” it into place.
Ribbed End
Ribbed
End
Grooves
Curved Pond Track
Assembled Track
Small Grooves
Large Grooves
Gate
Base Track
Bridge
Pegs
4
5
IMPORTANT! Be sure to complete
this assembly step before proceeding
to the next assembly step!
