Assembly
• Lift the arch on the base and
“Snap”
it
into the base.
Note:
The arch is connected to the base
by an electrical wire. Make sure this wire
retracts into the arch before snapping into
the base.
1
2
1
1
•
“Snap”
the treetop to the tree trunk and
then into base.
Note:
The treetop only fits onto the tree
trunk one way. If it does not seem to fit,
turn it around and try again.
•
“Snap”
the tree trunk into the base.
1
3
•
“Snap”
the hedges into the slots in
the base.
Note:
If a hedge does not seem to fit into a
slot, try the other slot.
1
4
• Insert the tree branch into the arch and
the base.
• Push down on the tree branch to
“snap”
it in place.
3
Arch
Base
Treetop
Tree Trunk
Hedges
Tree Branch
