3
2 Base Tubes
Toy Bar
2 Toys
Parts
2 Swing Frames
#6 x 2,5 cm Screw – 2
IMPORTANT!
Please remove all parts from the package and identify
them before assembly. Some parts may be packed in the pad.
Shown Actual Size
Note:
Tighten or loosen all screws with a Phillips
screwdriver. Do not over-tighten the screws.
Seat Frame
Assembly
IMPORTANT!
Before assembly and each use, inspect this product
for damaged hardware, loose joints, missing parts or sharp edges.
DO NOT use if any parts are missing or broken. Contact Mattel for
replacement parts and instructions if needed. Never substitute parts.
• Slide the front and back legs on the swing frame out until they
“click”
into place.
• Repeat this procedure to open the other swing frame.
Front Leg
Back Leg
• Insert the front legs on the swing frame into the base tube.
• Insert two M5 x 27 mm screws into the front legs and tighten.
Base Tube
Screws
Seat Pad
M5 x 27 mm Screw – 4
1
2
Hint:
To allow the product to swing
properly, the swing arm-to-frame
(with power switch) connection is
designed to be loose.
