8
W2603pr-0920
Plug the motor harness connector from the vehicle
•
into the steering wheel connector.
Children can be harmed by small
parts, sharp edges and sharp points
in the vehicle’s unassembled state,
or by electrical items. Care should be
taken in unpacking and assembly of
the vehicle. Children should not handle
parts, including the battery, or help in
assembly of the vehicle.
Motor Harness
Connector
Steering Wheel
Connector
1
ASSEMBLY
WARNING
While carefully feeding the wire down into the dash,
•
fit the steering wheel onto the dash.
2
SIDE VIEW
Turn the steering wheel slightly to access the hole in
•
the side of the steering column.
Insert a #8 x
•
3
/
4
" (1,9 cm) screw into the hole on the
side of the steering column. Tighten the screw with
a Phillips screwdriver. Do not over-tighten.
Hint:
For your convenience, there is a hole in each side of
the steering column and an extra #8 x ¾" (1,9 cm) screw.
You will only need to use one screw on one side of the
steering column to fasten the steering wheel.
3
Fit a slotted screwdriver into the slot on the steering
•
wheel, as shown.
Carefully remove the steering wheel cover from the
•
steering wheel.
Slot
Steering
Wheel Cover
4
