Before Use
Parts
Please keep small parts such as plastic tabs out
of children’s reach. Throw the plastic tab away.
Note:
A plastic tab is attached to the toy for in-store
demonstration purposes.
While the tab may have already been removed, check the chair
bottom to be sure. If the plastic tab is still attached, pull and
remove the tab from the toy. Throw the plastic tab away.
CAUTION
4 Legs
Seat Bottom
Seat Back
Connector Cover
Table Base
#4 x
5
/
8
" Screw – 10
Shown Actual Size
Table Top
Note:
Tighten or loosen all screws
with a Phillips screwdriver.
Do not over-tighten the screws.
Assembly
Seat Back
Seat Bottom
1
1
• Fit the chair back into the chair bottom, as shown.
1
2
• Position the chair assembly so the bottom is facing you.
• Insert two screws through the chair bottom and into the base.
Tighten the screws.
1
3
• Fit the four legs to the chair bottom, as shown.
Note:
each leg fits in only one location.
• Insert a screw into each of the four legs. Tighten the screws.
This toy contains small parts
in its unassembled state.
Adult assembly is required.
CAUTION
