Battery
Replacement
Battery Safety
Information
In exceptional circumstances, batteries
may leak fluids that can cause
a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the
product. Dispose of batteries safely.
Do not dispose of this product in
a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be
charged under adult supervision.
1,5V x 2
"AA" (LR6)
For best performance, we recommend
replacing the batteries that came with
this toy with two, new “AA” (LR6)
alkaline batteries.
• Locate the battery compartment on
the bottom of the toy. Loosen the
screws in the battery compartment
door with a Phillips screwdriver and
remove the door.
• Remove the exhausted batteries and
dispose of them properly.
• Insert two, new "AA" (LR6)
alkaline
batteries.
• Replace the battery compartment
door and tighten the screws. Do not
over-tighten.
• If this toy begins to operate erratically,
you may need to reset the electronics.
Remove the batteries and reinstall them.
Note:
To avoid moisture in the battery
compartment, replace the battery
compartment door after installing
batteries. Tighten the screws in the
battery compartment door with a Phillips
screwdriver. Make sure the battery
compartment door is fully assembled,
according to these instructions.
