Assembly
•
“Snap”
the tube into the tube with the hub.
• First, open the end
of the plastic tube so that you can see the peg.
• Then, fit the hole on the end of the tube with mobile
over the peg on the plastic tube.
• Close the end of the plastic tube.
• Insert two screws into the plastic tube and tighten.
Tube with Hub
Tube
Tube with
Mobile
• Insert and
“snap”
the post on one arch assembly
into the hub on the other arch.
4
• Insert the base ends of each arch into the slot in
each corner of the quilt.
Plastic Tube
1
1
1
2
Base
1
3
1
4
• Slide the fabric down the arch assembly. Then, secure
the fastener around the end of the tube.
1
5
1
6
Fastener
