Chutes
This product contains small parts.
For assembly by an adult. Take extra care
during unpacking and assembly.
CAUTION
Assembly
Base
• Position the base upside-down on a flat surface.
• Fit the two chutes into the openings in the base, as shown.
• Insert two screws into each chute and tighten.
1
• Fit the two supports into the openings in the base, as shown.
• Insert two screws into each support and tighten.
2
• Fit the foot onto the two supports.
• Insert four screws into the foot and tighten.
• Set the assembly upright.
• Press and hold the two buttons on the hubs. Then lift the
arch until it
“clicks”
in place.
3
4
3
Supports
Press
Foot
Press
