FISHER-PRICE and associated trademarks are owned by Mattel and used under license from Mattel Europa B.V. ©2013 Mattel. All Rights Reserved.
MADE IN CHINA.
FISHER-PRICE ainsi que les marques et les logos afférents appartiennent à Mattel Europa B.V. et sont utilisés sous licence. ©2013 Mattel. Tous droits réservés.
FABRIQUÉ EN/AUX/AU/À CHINE.
Marcas registradas utilizadas bajo licencia. Todos los derechos reservados.
HECHO EN CHINA.
Manufactured for and distributed by
Kids Station Toys Incorporated
P.O. BOX 694660 MIAMI, FLORIDA 33269-4660
KFP1749-IB-E0GC1-A0US
PRINTED IN CHINA
Caution:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference that may cause undesired operation.
Battery Information
Adult Installation Required
1. Open the battery compartment door
on the bottom of unit by removing
the screw with a screwdriver (not
included) and lift up.
2. Insert three (3) “AA” size batteries
(not included) following the
polarity marked inside the battery
compartment.
3. Replace the battery compartment door and screw.
Battery Precautions
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as
indicated in the battery compartment. Reversed batteries may cause
damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and
Carbon-zinc) or old batteries with fresh ones.
4. If the batteries in the device are weak/dead or if the device will not
be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can
overheat and rupture. (Follow battery manufacturer’s directions.)
6. Do not dispose of batteries in a fire; batteries may leak or explode.
Operation
1. Slide the ON/OFF switch to the ON position.
2. Enjoy playing your drums using the supplied drumsticks and the
flashing lights will blink.
3. Step on the Foot Pedal to hit the Bass Drum.
4. Slide the ON/OFF switch to the OFF position to turn the unit off.
Auto Shut Off
To preserve the batteries, this unit will automatically go into Standby mode
when not in use. Turn the power off and then back on again to resume use.
1. Small Drum
2. Cymbal
3. Flashing Lights (Front of
Bass Drum)
4. Medium Drum
5. Drum Sticks
6. ON/OFF Switch
7. Battery Compartment
8. Bass Drum
9. Foot Pedal
10. Stool
1
2
8
9
10
6 7
4
3
5
Assembly
Care and Maintenance
1. Keep the surface clean by wiping with a soft dry cloth.
2. Keep the unit away from direct sunlight or excess heat sources.
3. Remove batteries when the unit is not in use for an extended period of time.
4. Do not expose the unit to moisture or water, and do not drop on hard surface.
