Assembly
3
• Place the loops at the top of the net into the grooves
on the ring.
• Pull each loop through a ring tab, as shown.
Groove
Ring
Ring Tab
Groove
Ring
Tab
Hole
Hole
Rectangular
Tabs
Hole
Rim
Hole
Net Assembly
• Place the rim on a flat surface with the rectangular
tabs facing up.
• Locate the four screw holes on the underside of the
net assembly.
• Align the four screw holes on the underside of the net
assembly with the four holes in the rim.
• Place the net assembly onto the rim.
• While holding the ring assembly and rim together,
turn them over.
• Insert four screws into the holes in the rim, making sure
each hole in the rim is still aligned with each screw hole in
the net assembly.
• Partially tighten the screws with a Phillips screwdriver. Turn
the rim over to ensure that the net loops are still in the
grooves and through the ring tabs before completely tight-
ening the screws. Do not over-tighten the screws.
Rim
• Turn the rim upside down.
• Twist and insert the ends of the ball return into the slots in
the rim.
• Pull on the ball return to be sure all six ends are fastened
to the rim.
2
1
4
3
