Fisher-Price H7182 Instructions Manual Download

Page: 15 / 16

Adjusting the Seat

To adjust the seat angle:

• Squeeze the seat back handle and push the

seat back forward or, pull it backwards to the desired position.

• Push the seat back to be sure it is latched in position.

Hint:

Adjust the seat angle to any of three positions: Upright,

Semi-Recline or Recline.

To adjust the seat height:

• Press the levers on both seat height adjusters and lift or lower the

seat to the desired height.

• Make sure both sides of the seat are adjusted to the same height.

Push the seat bottom to be sure the seat is locked in place.

Hint:

Adjust the seat height to any of seven positions!

Prevent serious injury or death from
falls or sliding out.

It is recommended

that only children capable of sitting upright
unassisted use the high chair in the
upright position.

WARNING

Upright

Semi-Recline

Recline

Seat Height

Adjuster

Squeeze

Press Lever

Prevent serious injury or death from falls
or sliding out.

•

Always leave wheels locked

•

Never use near steps.

WARNING

Press Tab

Lift Tab

TO LOCK:

Press the tab down until you hear a

"snap"

TO UNLOCK:

Lift the tab up.

Brakes

Summary of Contents for H7182

















Search results

Summary of Contents for H7182

Reviews:

Related manuals for H7182

Brands by name

Popular brands

Fisher-Price H7182, Instructions Manual

Search results

Summary of Contents for H7182

Reviews:

Related manuals for H7182

Brands by name

Popular brands