background image

Securing Your Infant

To prevent serious injury or death:

• Always use the restraint until child is

able to climb in and out of the chair
unassisted.

• It is dangerous to use this product on 

an elevated surface.

• Never leave child unattended.

WARNING

Restraint Belt

2

Restraint Pad

Restraint Belt

• Place your child in the seat. Position the restraint pad between

your child’s legs.

• Fasten the restraint belts to each side of the restraint pad. 

Make sure you hear a “click” on both sides.

• Check to be sure the restraint system is securely attached by

pulling it away from your child. The restraint system should
remain attached.

Free End

Tighten

Loosen

Anchored End

Free End

Anchored End

To tighten the belts:

Feed the anchored end of the restraint belt

up through the buckle to form a loop     . Pull the free end of 
the restraint belt     . Repeat this procedure to tighten the other
restraint belt.

To loosen the belts:

Feed the free end of the restraint belt up

through the buckle to form a loop     . Enlarge the loop by pulling
on the end of the loop toward the buckle. Pull the anchored 
end of the restraint belt to shorten the free end of the restraint
belt     . Repeat this procedure to loosen the other restraint belt.

8

8

3

Summary of Contents for H5985













Reviews: