![Fisher-Price H4656 User Manual Download Page 6](http://html.mh-extra.com/html/fisher-price/h4656/h4656_user-manual_2298233006.webp)
METHOD 2 - PROGRAMMING THE UNIT
USING THE MANUFACTURER CODES
1. Press the “ON” button found on the front of your
Read With Me controller.
2. Remove the cover of your Read With Me
controller using a Phillips screwdriver.
3. When you hear the controller begin the audio
prompt, press and hold the Asterisk “*” button for
2 seconds.
The controller will switch to Manual Programming
Mode. The following audio prompt will play: “You
are now in Manual Programming Mode.”
4. Look up the manufacturer’s code for your DVD
player in the back of this USER’S MANUAL.
If there are multiple codes for a particular
manufacturer, start with the first code.
5. Enter the first code number using the numbers
indicated next to each button.
6. After the 4th digit is pressed, the Green LED light
will display a long blink.
7. Screw the cover back on your controller and test
that the controller is programmed properly by
proceeding to the TESTING YOUR
CONTROLLER section of this manual.
8. If all the shapes and buttons do
NOT
light up on
your TV screen properly during the TEST, begin
the SET-UP procedure again from STEP 1 of this
method using the next code number listed for your
manufacturer.
9. If you have tried all the codes for your
manufacturer and the unit still does not function
with the DVD player, try programming the unit
using the next method.
5
CODE
ENTRY
6