• Snap the cupped tab on the
vine to the peg on the tree top.
• At an angle insert one of the pegs on the stump top into
one of the holes in the stump.
• Insert and snap the other peg on the stump top into the
other hole in the stump.
• At an angle insert the longer peg on the log into the hole
in the base. Make sure the tab on the underside of the log
fits into the groove in the base (See inset).
• Insert and snap the shorter peg on the log into the other
hole in the base.
• Insert and snap the launcher into the launcher base.
Assembly
• With the bridge lowered and the
floor angled as shown, fit the
curved end of the floor onto
the ledge on the rear right trunk.
• Rotate the floor to fit it between
the grooves on the rear left trunk and front left trunk.
• Make sure the triangle tab on the floor fits behind the post
on the front left trunk (see top view inset).
• Raise the bridge.
7
9
5
Groove
Ledge
Stump Top
Hole
Tree Top
Rear Left Trunk
Short Ladder
Hole
• Insert and snap one end of the short ladder into the hole
in the base behind the rear left trunk.
• Insert the other end of the short ladder into the other hole
in the base.
8
Vine
Floor
Bridge
Curved
End of
Floor
Log
Launcher
Peg
Shorter
Peg
Groove
Longer
Peg
Tab
Triangle Tab
Post
Top View
Launcher
Base
10
