Battery Installation
Remote Controller
• Locate the battery compartment on
the bottom of the remote controller.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door and insert three
“AAA” (LR03)
alkaline
batteries.
• Replace the battery compartment door
and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• If this remote controller begins to oper-
ate erratically, you may need to reset
the electronics. Remove the batteries
and reinstall.
1,5V x 6
“AAA” (LR03)
We recommend the use of
alkaline
batteries for longer battery life.
IMPORTANT!
Under normal use conditions, the batteries in the vehicle will require
replacement more often than the batteries in the remote controller. For additional
information, refer to the troubleshooting section on the last page of this sheet.
Vehicle
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver. Lift the battery
compartment door. Insert three “AAA”
(LR03)
alkaline
batteries.
• Close the battery compartment door
and tighten the screws with a Phillips
screwdriver.
Do not over-tighten.
• If the vehicle begins to operate
erratically, you may need to reset the
electronics. Remove the batteries
and reinstall.
