3
Assembly
IMPORTANT!
Before assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT
use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts.
• Rotate the upper frame tube until it
"snaps"
into an upright
position, as shown.
Upper Frame Tube
1
• Position the front tube so that the rubber feet are flat on
the surface.
• While pressing the button on the lower frame tube, insert it
into an end of the front tube. Continue to insert the lower
frame tube into the front tube until you hear a
"click"
.
• While pressing the button on the front tube, insert it into
the end of the lower frame tube. Continue to insert the
front tube into the lower frame tube until you hear
a
"click"
.
Press Button
on Front Tube
Press Button on
Lower Frame Tube
Rubber Feet Down
2
• Pull the front tube to be sure it is secure to each lower
frame tube.
Lower Frame Tubes
Pull Front Tube
3
• While pressing the buttons on the upper frame tubes,
insert them into the holes in the underside of the frame.
• Continue to insert the upper frame tubes into the frame
until you hear a
"click"
on both sides.
Press Button
on Upper
Frame Tube
Frame
4
